products

ALLTEMP® HEAVY DUTY EXTENDED LIFE COOLANT uses advanced organic acid technology (OAT) additive/inhibitor package formulated with a proprietary stabilization system to improve the durability of its carboxylate salt base and extend its range of compatibility with both conventional inorganic salt and OAT-type antifreezes. It provides superior engine protection against freezing, boil over, cavitation erosion, corrosion and scale and a service life of 600,000 miles or 12,000 hours, with inhibitor addition required at 270,000-330,000 miles or 6000 hours. It contains no phosphates or amines, and employs mono- and dibasic organic acid salts with tolytriazole, nitrites and molybdates to protect all six standard metal alloys (copper, solder, brass, cast iron, steel, and aluminum). It meets Caterpillar EC-1. ALLTEMP®™ Heavy Duty Extended Life Antifreeze eliminates the need for SCA’s at initial fill and top off because it has a minimum nitrite level of 2400 PPM which reduces long term maintenance cost and problems related to SCA variability. Slowly depleted phosphonocarboxylates and other proprietary ingredients provide broad range metal protection and guard the cooling system against corrosion and cavitation erosion for many years. In addition, it contains additives to minimize hot surface scaling while also preventing heat transfer surface fouling due to minor oil leakage.

ALLTEMP®™ Heavy Duty Extended Life Coolant is recommended for use in heavy duty engines. It is also recommended for use in the cooling systems of all types of industrial internal combustion engines, including systems containing large amounts of aluminum.

Available in bulk, 55 gallon drums, and 6/1 gallon cases
Click to Enlarge

SDS

ALLTEMP® EXTENDED LIFE SPECIFICATIONS

Information about different types of antifreeze

 

Benefits

ALL TEMP® SPECIAL FOMULA IS PRECHARGED WITH INHIBITORS TO PREVENT CORROSION - SCALE - CAVITATION - GELLING

  • FULLY FORMULATED WITH QUALITY COOLANT ADDITIVES (SCA)
    Rust occurs when water in regular antifreeze attacks vital engine metals in cooling systems. ALLTEMP® contains the inhibitors needed to prevent corrosion.


  • PHOSPHATE-FREE FOMULA TO REDUCE SCALE
    White particles cover and suffocate engines, trapping in heat. Scale is caused from the microscopic particles found in tap water that react to inferior coolants forming hard water scale


  • PRECHARGED WITH NITRITE FOR SUPERIOR CAVITATION PROTECTION
    Cavitation is the process caused from the escape of coolant into the engine crankcase from a perforated wet sleeve cylinder liner. When it mixes with oil, expect unnecessary downtime, expense and labor costs.


  • SILICATE FREE TO PREVENT "GEL"
    Inferior antifreezes are high in silicates that make them susceptible to inhibitor "fall out" This causes separation and is commonly referred to as "Green Goo"

ALLTEMP® is a registered trademark of MARCUS PRODUCTS COMPANY